For Ridgid R4512 / R4520 Fence Rail Guide / Slider Upgrade / Mod /

 For Ridgid R4512 / R4520 Fence Rail Guide / Slider Upgrade / Mod / Fix/Solve Gap

  Welcome to Our Store, we will provide you the most suitable and Affordable products. If you have any problem, wish you not give us Neutral or Negative Feedback please contact us first, we will give you 100% satisfactory solution.:)

 

Features

1. Eliminating any gaps or free movement between the rail and the fence.

2. The rear hook fence has been enlarged, greatly reducing wobble caused by the undersized original part.

3. Improved contact area between the rail and both the front sliders and rear hook fence.

4. A heavier-duty tensioner on the two front sliders ensures stable and even pressure between the front of the fence and the rail.

 

Specifications:

Condition:Brand New & High Quality

Type:Fence Rail Guide 

Color:Orange

Material:ABS Plastic

Replace Hook Fence Part Number: 080035003163

Replace Slider Part Number: 080035003153

 

Fitment

For R4512 / R4520 Only

Package Included

3PCS of Fence Rail Guide Kit

 

Installation instructions：

 1.Remove the 4 screws from the front slider and install the new custom slider. Use the same screws, but be careful not to tighten them too much.

2.Loosen the large 8mm locking nut until it is almost protruding (or temporarily remove it).

3.Remove the screws from the rear gate after disassembly. Remove the rear gate.

4.Install the new rear gate. It should fit SNUG, so if you encounter difficulty, slight grinding may be necessary. Insert and tighten with the original screws.

5.Reinstall the original large 8mm locking nut and adjust as needed until the gate fits snugly back onto the track. Do not make it too loose!

6.Apply a suitable amount of wax paste on the surfaces of these components, especially those in contact with the rails. Also, apply wax paste on the gate.

We only accept PayPal.


1.Shipping from the US Stock by USPS.

2.Within 2 business days after payment cleared. 
3.Please offer us your telephone number or your order will be delayed since the courier will need it for the delivery.
4.Delivery time depends on destination,usually arrive 1-6 days after delivery.


If you have problems with the following issue please Contact Us immediately ! *You do not satisfaction the item quality *Item do not fit your motorcycle perfect *Item can not reach your expectation *The item arriver be broken *You do not receive the item *Parcel Lost *Receive the wrong item Please do not worry !!! We are honest ebay dealers ,we will endeavour to resolve all of your problems until you are satisfied. Please feel free to Contact Us

We have poweful partner factory to sure our price can be the best !!Service to every rider over the World is our target !!!!

We have professional team to care about every piece of fairing sale from us. Best sevice is the key to make we stand out.

Features

1. Eliminating any gaps or free movement between the rail and the fence.

2. The rear hook fence has been enlarged, greatly reducing wobble caused by the undersized original part.

3. Improved contact area between the rail and both the front sliders and rear hook fence.

4. A heavier-duty tensioner on the two front sliders ensures stable and even pressure between the front of the fence and the rail.

 

Specifications:

Condition:Brand New & High Quality

Type:Fence Rail Guide 

Color:Orange

Material:ABS Plastic

Replace Hook Fence Part Number: 080035003163

Replace Slider Part Number: 080035003153

 

Fitment

For R4512 / R4520 Only

Package Included

3PCS of Fence Rail Guide Kit

 

Installation instructions：

 1.Remove the 4 screws from the front slider and install the new custom slider. Use the same screws, but be careful not to tighten them too much.

2.Loosen the large 8mm locking nut until it is almost protruding (or temporarily remove it).

3.Remove the screws from the rear gate after disassembly. Remove the rear gate.

4.Install the new rear gate. It should fit SNUG, so if you encounter difficulty, slight grinding may be necessary. Insert and tighten with the original screws.

5.Reinstall the original large 8mm locking nut and adjust as needed until the gate fits snugly back onto the track. Do not make it too loose!

6.Apply a suitable amount of wax paste on the surfaces of these components, especially those in contact with the rails. Also, apply wax paste on the gate.

PAYMENTWe only accept PayPal.
SHIPPING1.Shipping from the US Stock by USPS.

2.Within 2 business days after payment cleared. 
3.Please offer us your telephone number or your order will be delayed since the courier will need it for the delivery.
4.Delivery time depends on destination,usually arrive 1-6 days after delivery.
Terms of SaleIf you have problems with the following issue please Contact Us immediately ! *You do not satisfaction the item quality *Item do not fit your motorcycle perfect *Item can not reach your expectation *The item arriver be broken *You do not receive the item *Parcel Lost *Receive the wrong item Please do not worry !!! We are honest ebay dealers ,we will endeavour to resolve all of your problems until you are satisfied. Please feel free to Contact Us
ABOUT US

We have poweful partner factory to sure our price can be the best !!Service to every rider over the World is our target !!!!

We have professional team to care about every piece of fairing sale from us. Best sevice is the key to make we stand out.